6" Aluminum Omni Wheel
Product Description
6" o.d. wheel with 14 rollers
Maximum workable payload, per wheel: 45 pounds
Below is a hardware kit, prepared for attaching sprockets to aluminum omni wheels.
These wheels combine the best features of the AndyMark Trick Wheels with the AndyMark plastic omni wheels. They are light and durable. They will bend under a severe impact, but can be easily repaired.
The center bore is sized receive a 1+1/8" diameter flange bearing (FR8ZZ) in a press fit manner. #10-32 screws sandwitch the inside plate between two identical outside plates.
A Universal hub or AndyMark sprockets can be mounted to the 1.875" diameter bolt circle to drive this wheel through an axle or sprocket.
6 Inch Aluminum Omni CAD file (.stp)
Maximum workable payload, per wheel: 45 pounds
Weight:
0.5 lbs.Hardware:
Frame is 3 sheets of 1/8" thick aluminum. Rollers are 80a durometer tan SBR rubber, riding on brass eyelets and 1/8" dia. dowels.Below is a hardware kit, prepared for attaching sprockets to aluminum omni wheels.
These wheels combine the best features of the AndyMark Trick Wheels with the AndyMark plastic omni wheels. They are light and durable. They will bend under a severe impact, but can be easily repaired.
The center bore is sized receive a 1+1/8" diameter flange bearing (FR8ZZ) in a press fit manner. #10-32 screws sandwitch the inside plate between two identical outside plates.
A Universal hub or AndyMark sprockets can be mounted to the 1.875" diameter bolt circle to drive this wheel through an axle or sprocket.
Downloads
6 Inch Aluminum Omni Assembly file (.pdf)6 Inch Aluminum Omni CAD file (.stp)
Accessories
Copyright © 2004-2008 AndyMark, Inc. All rights reserved.
